|DIAMETER MM||NOMINAL WT OF|
Thermex QST Technology
All TMX steel rebars are TMT rebars, but all TMT rebars are not THERMEX/TMX rebars. Only those TMT bars manufactured using the licensed QST technology are TMX or THERMEX rebars. The structural uniformity is the highlight feature of TMX Bars. THERMEX process converts the bar surface to a hardened structure.
AI Cooling Bed
AI COOLING FOR UNIFORM STRUCTURE OF REBARS
The production phase involves cooling at ambient temperature to allow the hot core to temper the surface through the Thermex exchange. This results in a unique structure of tempered martensite periphery and fine-grained ferrite-pearlite at the core. This structure should be uniform throughout the cross-section of rebars.
RIB PATTERN- FOR SUPERIOR BONDING STRENGTH
STEELMAX TMX bar uses a rib pattern that uses in B500C rebars in British standards where the ribs shall alternate between a higher and lower angle with respect to the bar axis which yields a better bond strength. bars maintain the bond requirement more than as specified in the standard which increases the bond strength better with the concrete.
ENHANCING MECHANICAL & CORROSION RESISTANCE PROPERTIES WITH MICRO-ALLOYING
STEELMAX TMX Bar uses low alloying elements like Chromium and copper (combining to above 0.40%) to improve corrosion resistance properties and other mechanical properties.
QR Code Certificates
QR CODES FOR DIGITAL CERTIFICATES
Want to view the quality testing certificate for your steel? Please fill in the form in the link below with your purchase lot number to view the quality certificate details.